Presenting Top Gun Customz Newly Redesigned Dodge 8" Suspension Lift Kit!

Top Gun Customz is proud to release our newly redesigned 8" Long Arm Coil Spring Lift Kit for the 2003-2007 Dodge Ram Diesel 2500/3500 4x4's.. We have thoroughly looked over every component to find where we could make changes and upgrades. We strive to continue to improve on our products all the time. What we have just released, we feel, is the best 8" kit on the market....for several reasons. Only the highest quality materials are used and some of the most innovative designs out there are in this kit. Look below at some of the features that make this kit truly remarkable.

---

Just a few of the NEWLY DESIGNED Top Gun Customz products that are included in this amazing kit!

Top Gun Customz New "Boxed" Long Arm System: (Click for larger view)
These arms are newly redesigned to accommodate a full turning radius with wider tires. Our lower arms have a slight bend so the larger tires most often used on lifted trucks are not impeded in any way at full turn. Plus, our arms are extremely durable and tough. This long arm system can take anything you dish out and look good doing it!
Chromoly Rebuildable Heavy Duty Joints:
Our upper and lower long arms feature double adjustable joints at both ends. We chose these joints for a reason. The flex joints, located at the frame end, absorb energy from the axle which translates into a very smooth ride. 60,000lb load capacity Built out of Chromoly Steel Fully Serviceable Fully Rebuildable

Top Gun Customz New Dodge Rear Lift Blocks: (Click for larger view)
These trucks use a dual center pin on the rear spring. Our blocks have 3 holes on the top side which those pins sit down into. This "locks" the block with the spring. Most companies use a "universal" rear block that lets the outside two pins "float" without locking into place.. Our blocks are also 3" wide, just like the spring and the spring pad itself. Why mount a CAST block that is 2.25" wide under a spring that is 3" wide? A full 3/4" of the spring will not be making contact with the block.

Top Gun Customz New Sway Bar End Link Kit: (Click for larger view)
We have fixed a problem many experience with their lifted Dodge Rams. The problem is contact between the drag link (steering arm that goes from the pitman arm to the tie rod) and the factory sway bar mount welded to the axle on the passenger side. Often times, with lifts greater than 6", the drag link will make contact with this factory sway bar mount and cause a rubbing issue, which can be felt in the steering wheel. Some have decided to simply grind the factory sway bar mount to the point it doesn't rub. Our design requires removal of the factory sway bar "tab" or "arm" from the axle. After it is removed, our new brackets bolt into place using existing holes and a couple holes that need to be drilled. We use the highest quality teflon lined rod ends for long lasting, durable operation

---

This kit is the culmination of many hours of research and development and we could not be more proud of how this kit turned out. Each component in this kit was crafted and designed for the 2003-2010 Dodge Ram 2500/3500 Diesel 4x4 in mind. If you would like to learn more about this kit please visit out website. All of these Top Gun Customz exclusive products including the New long arm upgrade are available separately and we be seen on our site soon. Keep an eye out for these amazing products!

(Choose your year range for the correct kit)
8" 03-07 Dodge Ram 2500/3500 4x4 Long Arm Lift Kit
8" 08-09 Dodge Ram 2500/3500 4x4 Long Arm Lift Kit
8" 2010 Dodge Ram 2500/3500 4x4 Long Arm Lift Kit